The main design disadvantage of dual phase steel flange is no leakage. This is a deficiency in that design. The connection is dynamic, stainless steel flange, and periodic loads such as thermal expansion fluctuation will cause the movement between flange faces, affect the function of flange, damage
First, the connection between flange and pipeline shall meet the following requirements:1. The center of pipe and flange shall be on the same horizontal line.2. The center of the pipe is 90 degrees vertical to the sealing surface of the flange.3. The position of flange bolt on the pipeline shall be
In the production of large Stainless Steel flanges, there are many factors that affect the performance of large flanges. Here are some common factors, First, annealing temperature (the annealing temperature is the temperature parameter when the primer and template are combined. When 50% of the prime
International flanges are generally used for connection, so they are often connected with some pipes. But some people don't know much about its way. In fact, the national standard flange connection is to fix two pipes, pipe fittings or equipment on a flange first, and add flange pads between the two
The existence of dual phase steel flange restricts the growth of grains between dual phases. Dual phase stainless steel maintains fine grains, and the total area of grain boundary of dual phase stainless steel is larger than that of single-phase steel. Therefore, dual phase stainless steel has high
The existence of dual phase steel flange restricts the growth of grains between dual phases. Dual phase stainless steel maintains fine grains, and the total area of grain boundary of dual phase stainless steel is larger than that of single-phase steel. Therefore, dual phase stainless steel has high