banner

banner-1
ba-2
banner-4
banner-3-1
You are here: Home » News » Industry News » Polishing method of dual phase steel flange

Polishing method of dual phase steel flange

Views: 0     Author: Site Editor     Publish Time: 2022-05-18      Origin: Site

8-1

Polishing method of dual phase steel flange

1. There are four polishing methods of dual phase steel flange: manual, mechanical, chemical and electrochemical. Polishing can improve the corrosion resistance and decoration of the flange. The existing electrolytic polishing solution for stainless steel still uses phosphoric acid and chromic anhydride. During polishing and cleaning, some chromium and phosphorus will be discharged into the wastewater. Environmental pollution.

2. Passive film will be formed on the surface of dual phase steel flange, and the oxide film will begin to dissolve at the same time. Due to the micro inconsistency of the surface of dual phase steel flange, the micro convex part of the surface will be dissolved first, and the dissolution rate will be greater than that of the concave part. The film dissolves and forms almost simultaneously, but at different speeds. As a result, the surface roughness of the dual phase steel flange becomes lower and a smooth and shiny surface is obtained.

3. Polishing can make up for some surface defects such as surface pores and scratches, so as to improve the fatigue resistance.


We have an excellent technical team, our products in quality and quantity will make you satisfied, welcome to buy
  • 86-316-5120812
  • Mon-Sat: 09:00AM - 05:00PM
  • Room1-3-908 Zijincheng Commercial Building, Guangyang District, Langfang City,Hebei Province,China
CONTACT US
We have an excellent technical team
Incorrect E-mail
Follow Us
Copyright ©Langfang Dingyang Flange&Pipe Fitting Co.,Ltd 1998-2021. All Rights Reserved.                                                                                                                      Support By yiwaimao.cn