Choose pipe fittings according to connection method

Pipe fittings are used in many places in life. It is an indispensable part in the pipeline system. It can play the functions of connection, control, direction change, flow diversion, sealing and support. Depending on the connection method, different pipe fittings should be selected.
Welded pipe fittings are pipe fittings that are connected to pipes by welding, including elbows, flanges, tees, reducers, heads, etc.
Threaded fittings are threaded fittings, commonly used in water and gas pipes, small-diameter water pipes, compressed air pipes and low-pressure steam pipes.
Tube fitting is a new type of quick fitting, which has good sealing performance and can be used repeatedly. It is suitable for pipeline systems of oil, gas and general corrosive media.
Clamp pipe fittings are pipe fittings that are used to tighten the connection between quick joints, including clamps, quick joints, silicone sealing gaskets, chuck blind plates, etc.
The bearing pipe fitting is a kind of high-pressure pipe connection fitting which is formed by die pressing and forging blank of round steel or steel ingot, and is machined and formed by lathe.
The curved elastic double-melt pipe fitting has the same size as the pipe to be connected, and the connected pipe fitting is realized by hot-melt butt welding.
Bonded pipe fittings are pipe fittings that are connected by solvent-based adhesives, such as PVC plastic pipes.
Rubber ring connection type pipe fitting: it is composed of pipe fitting body, sealing end cover and sealing rubber ring.
If you have different needs, be sure to choose the right pipe fittings.